Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Specification
Placing Tool Dimensions
All dimensions are shown in millimetres.
Refer to the table on page 5 for the nose assembly dimensions 'A' and 'B'.
The tool is fitted with two Hydraulic Hoses and an electrical Control Cable, 0.6m in length. Additional hydraulic hose and
cable extension lengths are available to order separately as required. Refer to the table below for the available hose
assembly lengths and associated part numbers.
6
HYDRAULIC HOSE ASSEMBLY
PART NUMBER
07008-00448
07008-00449
07008-00450
HOSE LENGTH
5 Metre
10 Metre
15 Metre
Publicidad
Tabla de contenido
