Installing The Lk815 - Fanimation The Air Shadow FP815FS Manual Del Propietário

CAU T I ON
Turning off wall switch is not sufficent.
possible electrical shock, be sure electricity is turned
off at the main fuse box before wiring. All wiring must
be in accordance with National and Local codes and the
ceiling fan must be properly grounded as a precaution
against possible electrical shock.
1. Locate accessory mounting plate on bottom of fan.
3. Install switch cup adapter on the internal housing unit
with 3 screws and 3 lockwashers provided.
Installing the LK815OB
To avoid
Figure 1
Figure 3
▲WARN I N G
To avoid fire or shock, follow all wiring instructions
carefully. Any electrical work not described in these
instructions should be done or approved by a licensed
electrician.
2. Mount internal housing unit on accessory mounting
plate with 3 screws provided, in bag labeled "Housing to
Motor Assembly".
4. Locate white and blue wires labeled "FOR LIGHT".
Connect white-to-white and blue-to-black wires with wire
nuts supplied.
10
Figure 2
Figure 4