Care And Maintenance - Mestra R-100136 Manual Del Usuario

Baño de limpieza por ultrasonidos
Ocultar thumbs Ver también para R-100136:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CARE AND MAINTENANCE

To ensure optimum performance and maximum reliability of the device, we recommend:
When the heater is needed, press twice.
is turned on. El display mostrará la temperatura real del agua. When water
temperature reaches the set,
To ensure safety, the unit is designed with dual protections. The heater will
be turned off automatically if it has been running for 45 minutes.
When there is no dirt in the smoke, cleaning is done. If additional cleaning is
required, select the time again and repeat the previous steps.
When cleaning is completed, turn off the switch, remove the lid and retrieve
the items. Pour water out through the draining valve. Clean and dry the
tank. Close the draining valve.
Do not turn the unit without water in the tank.
Even though the unit is designed with multiple protections, if it is turned on for over 30
seconds without water in the tank, it may damage the unit or severely reduce the life of
the unit.
Do not turn the unit for extended time or continuously.
The unit is designed with overheat protection. If the unit has been running for 45
minutes, it is recommended to stop the unit for about 20 minutes to prolong the life of
the unit.
Do not keep water in the cleaning tank for a long time.
After cleaning is completed, open the drain valve to extract dirty water. Clean and dry
the tank. Close the draining valve.
Do not spray water over the housing.
Take care not to wet the keyboard.
Use a towel to wipe the tank and the housing.
Do not expose the unit under direct sunshine for a long time.
Keep the unit in a dry, cool and ventilated area.
flashes, indicating the heater
will decrease, indicating heating stop.

Publicidad

Tabla de contenido
loading

Tabla de contenido