Pleasant Hearth OFG419T Manual Del Usuario página 14

ASSEMBLY INSTRUCTIONS
11. Screw the knob (A) on the table lid (B) with one M4
X 6 screw (EE) and one washer ø4 (GG). Tighten with
phillips screwdriver (II).
Hardware Used
EE
Screw M4 X 6
GG
Washer ø4
Phillips Screwdriver
II
12. Pour one pack of the glass rocks (K) over the burner.
Do NOT cover ignition screen (P) with glass rocks (K).
Use a glove when handling glass rocks.
WARNING
DO NOT COVER THE IGNITION SCREEN when
placing the glass rocks into the fire bowl. Always
keep Ignition Screen visible. This screen must be
clear and free of obstructions at all times to insure
proper operation.
Screen
Do not place
glass rocks on screen.
Keep screen clear.
The burner of the firebowl must be covered by glass rocks
completely. Otherwise the flame may be extinguished occasionally.
See the Figure CORRECT and INCORRECT for reference.
CAUTION
GLASS ROCKS - Use a glove when handling glass rocks.
1. Do not light or use gas unit if glass rocks are wet. Make sure glass rocks are completely dry before lighting as intense heat
could cause the rock to crack.
2. Glass rocks could hit a person's face or eyes during the initial startup of this unit. Keep away from the appliance for the first
20 minutes after lighting.
11
X 1
X 1
12
CORRECT
INCORRECT
14
A
B
GG
EE
P
K