Bluetooth® Function - Teac AI-101DA Manual Del Usuario

Bluetooth® function
1
Turn the power knob to STANDBY/ON.
o You can also use the remote control standby/on
(¤) button when the unit is in standby .
2
Turn the INPUT SELECTOR knob to select
(Bluetooth).
This sets the source to Bluetooth .
o The indicator blinks and the unit can pair and
connect with other Bluetooth devices .
o The unit retains the same source mode even
when in standby .
So, this step can be skipped if the unit had already
been in Bluetooth mode when it was put into
standby .
3
Pair or connect with the other Bluetooth
device.
Pairing with another Bluetooth device
Pairing this unit with another Bluetooth device is nec-
essary the first time you connect with that Bluetooth
device .
If no paired Bluetooth device is found, this unit will
become ready to pair with another device . When this
unit is ready to pair, its
When this unit's
ing using the other Bluetooth device .
For details, refer to the operation manual of that
Bluetooth device .
When pairing with a Bluetooth device that supports
aptX® or AAC, this unit and the other device will use it
automatically when connecting .
20
indicator blinks .
indicator is blinking, conduct pair-