Package Contents; Using The System; Voice Guide - ECG BTS Elysium L1 Manual De Instrucciones

• Voice guide – for changing modes and overall control
• TWS support – pairing 2 of the same speakers delivers a stereo sound experience

Package contents

Wireless Bluetooth speaker, Micro USB cable, AUX-IN cable, Operating manual

USING THE SYSTEM

Before using the device for the first time, fully charge the integrated battery.
If you do not plan to use the speaker for a longer period of time, charge the device once a month to prevent
the surfacing of problems or damage caused by an excessively discharged battery.
1. Turn the speaker ON/OFF
Long press 1 for 2 seconds to turn the speaker ON or OFF.
After being turned OFF and ON again, the speaker remembers the settings, playback mode and volume from
the previous session.
After each charging cycle, the volume is adjusted up to 40% of the maximum volume.
GB
2. Bluetooth mode
1) Bluetooth pairing
Turn ON the speaker and enter Bluetooth mode, the LED indicator will begin flashing. Next, enable
Bluetooth on your mobile phone or other device and initiate the search for Bluetooth devices. The BTS
Elysium L1 device will appear among the available devices. Connect to this device. Once connected, the
speaker will indicate "Device paired" and the LED indicator will stop flashing blue.
Short press 3 to quickly enable Bluetooth.
2) Wireless music playback
Simply start the playback on your mobile phone or music player and listen to music from your speaker.
3) Hands-free paired with your mobile phone
Accepting an incoming call
Short press 3 to accept an incoming call.
Hang up
Short press 3 again to hang up.
Redial
Double press 3 to initiate a call to the previously called number.
Private call
Press 4 or 5 to switch between speaker and phone during a call.
Reject an incoming call
Long press 3 to reject an incoming call.
4) Disconnect an existing Bluetooth connection
The speaker will automatically pair with the last known Bluetooth device. Long press 3 to disconnect
from the current Bluetooth connection, the speaker will indicate "Device disconnected". The speaker is
then ready to be paired with another device.

3. Voice guide

Once enabled, the speaker plays information regarding the current playback mode, e.g.: Bluetooth mode, Aux
in mode, device paired, device disconnected etc.
The voice guide can be disabled by long pressing EQ 6.
4. TWS (Stereo playback)
Turn ON two BTS Elysium L1 speakers and switch both into Bluetooth mode.
Short press 7 on one of the speakers to begin searching the second BTS Elysium L1 speaker. The speaker's
LED indicator flashes orange and blue during the search process. Both speakers are automatically paired. After
a successful pairing, the LED indicator of the speaker playing the left channel turns blue and the LED indicator
of the speaker playing right channel turns orange.
40