Vacuum Function - CASO DESIGN SV1000 Manual De Instrucciones

However, you can use the device also without setting the cooking time.
Press key ' ' (Key 2) to activate the device. The unit will operate
continuously without time limit if the cooking time is set to 00:00.
To stop or interrupt the cooking, press key " " (Key 6).
To interrupt the power supply and switch off the device, press ' ' (Key 1)
for one second.
To check the input made via the individual keys, press the respective key
for a little more than half a second.
Setting the delayed mode:
If the cooking process is to be started not immediately but only after expiry
of a delay, first set the desired temperature and cooking time as described
above.
Then press key " " (Key 5) to activate the delayed cooking mode.
Once key " " is lit, use the arrow keys (-/+) to select the desired end of the
cooking time and confirm by pressing key " " (Key 6).
Now both key " " (Key 6) and " " (Key 5) are lit, and the device starts to
count down.
When the time remaining equals the cooking time, key " " (Key 5) will go
dark. The unit begins to heat up and starts the cooking program.
Once the time is down to 00:00, the cooking process is finished and the
food can be served.
You can select the cooking delay times from 6 minutes to 12 hours.
Please note that the selected time may be delayed further by up to
another 5 minutes because the heating time of the water is not included.
Depending on the initial temperature of the water filled in, a few minutes
more will have to be taken into account.
► If the device should indicate "E001" in the LED display after switching
on even though the water filled in is above the minimum level, please
add some salt to the water and stir well.

14.3 Vacuum function:

1. Press against the door on the front of the device to open the magazine,
and remove the vacuum adapter.
Note: E001