Bosch HDC100 Instrucciones De Funcionamiento Y Seguridad página 3

2610048761.qxp_HDC100, 200, 250, 300, 400 10/25/17 1:47 PM Page 3
If devices are provided for the connection to
dust collection and extraction systems, be
sure these are connected and used
according to tool and dust extractor
instructions. Proper use of dust collection can
reduce dust related hazards.
If devices are provided for the connection of
dust collection and extraction systems,
empty the dust container before beginning
work, frequently during work, after
completion of work, and before storing the
tool. Be extremely careful of dust disposal,
materials in fine particles form may be
explosive.
Do not throw dust on an open fire.
Combustion from mixture of varnishes,
lacquers, polyurethane, oil or water with dust
particles can occur if there is a static discharge,
electric spark, or excessive heat.
Do not use dust extraction for operations
where dust may include burning, smoking
or smoldering items like hot ashes or
sparks. Fire inside the dust extractor tank or
bag may occur. Dust may smolder and set dust
extractor on fire long after work is completed.
Do not use dust extraction with explosive
dusts, varnish, polyurethane coatings,
Specific Safety Rules for Attachment
cleaners, or oil-based paints. Electric motors
create sparks which may ignite the dust or
fumes.
Do not use dust extraction when working on
metal. Swarf from drilling metal may be hot and
may spark which may melt plastic adaptors,
dust extractor hoses and may cause a fire
inside the dust extractor tank or bag.
Do not drill into metal with the dust
extraction system mounted. Hot metal chips
can self-ignite or ignite parts of the dust
extraction system.
Do not drill into wood with dust extraction
system mounted. Wood chips are typically too
large and will clog the dust channel.
Do not use to clean asbestos.
HDC100: can be used for drilling and chipping
applications;
HDC200. HDC250: can only be used for drilling
applications – do not use when chiseling,
screw-driving or cutting threads.
HDC300, HDC400: can only be used for
chiseling or demolition applications (see chart
for details) – do not use when drilling, screw-
driving or cutting threads
-3-