Fenix MEGARA 100 Manual De Usario página 2

C14.048G
Page 1 of 1
Certificate date:
Issued to:
The Inspector that signs this certificate has done the report 6015.14G for the revision of the
manufacturer documentation and machines design assessment, based on:
Directive 2006/42/CE on machinery that establish "Essential health and safety requirements

relating to the design and construction of machinery".
 la BGV C1: "Accident prevention regulations for event and production for stage
performances"
 BGG 912: "Testing of safety and mechanical equipment in staging and production for stage
performances ".
REFERENCE / TYPE / MODEL:
Lifting tower MEGARA 100 has been designed to vertically raise structures and lighting and sound
Description:
equipment to different heights.
Model properties:
Fixation of tower sections to working height with safety pins.
Leg anchorage with safety pins.
Bubble level to adjust tower vertical position.
Each lifting tower has to be supplied with an EC declaration of conformity, including serial number and date of manufacturing.
To comply with BGG 912, for some event or production, an inspection done by an expert could be required before start up.
Based on reviewed documents, the inspector certifies that the machine COMPLIES with all minimal
design dispositions of the regulations applied.
2 2
2 2
CERTIFICATE
02-06-2014
FENIX STAGE, S.L.
Avda. de los Trabajadores, 24
46026 - Horno de Alcedo (Valencia) - Spain
NAME: Lifting tower
MARK: FENIX
MEGARA 100
• Maximum height: 4,00 m.
• Minimum height: 1,66 m.
• Maximum load: 100kg.
• Minimal load: 25kg.
• Material: steel EN 10305-5
• Cable: galvanized steel EN12385-4. Max. load
6,39kN, strength quality 1770 N/mm2,
diameter 3mm, composition 7x19+0
• Open base area: 1,57 x 1,57 m.
• Area of the base closed: 0,36 x 0,36 m.
• Weight: 33kg.
• Winch: 450kg Maximum Load with automatic
load retention brake
In Bergondo at, June 2, 2014
Maite Fernández Varela
Mines and Materials Engineer
Expert in Industrial Safety
www.audiovias.com