Technical Specifications - Fracarro SAF-HD 10 Instrucciones De Funcionamiento

Ocultar thumbs Ver también para SAF-HD 10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

LOADING THE CONFIGURATION FILE
By means of a pen drive, a configuration that was previously memorized or saved from a PC can be loaded
into the "CONTROL UNIT - USB MEMORY".
When the display shows "insert USB," insert the pen drive and press the
scroll down the files within the pen drive and select the configuration file that you want by pressing the
to load the configuration into the SAF-HD unit. A message will be displayed when the operation is complete.
Notes:
When a configuration is copied from one headend to another, all settings are copied, including the
headend parameters such as user code and language.
Accepted formatting for the pen drive: FAT-12, FAT-16, FAT-32 (MS-DOS).
The pen drive cannot have two or more partitions and/or a proprietary file system.
The configuration files must be saved in the root (principal directory) of the disk (the SAF-HD does not
allow access to the sub-folders).
The name of the configuration file must not exceed 16 letters ( "cpr" extension not included)
Special symbols such as *, /, \, !, ... etc. are not accepted.
6.1 REMOTE MANAGEMENT
For managing the headend configuration remotely through the PC, refer to the Fracarro Headend Manage-
ment software.
6.2 UPGRADE FIRMWARE
The SAF-HD unit can be upgraded by a PC by means of the RJ45 serial port or remotely when connected
to a controller host.
To find the last firmware and upgrade instructions, refer to the section "Software updating" within the website
www.fracarro.com.
TV Inputs
B.III/DAB/FM Input
TV Output
Input connectors
RF output connectors
Impedance
TV digital signal levels
FM signal levels
Max power at each input
Return Loss
6. REMOTE MANAGEMENT AND UPDATING

7. TECHNICAL SPECIFICATIONS

FREQUENCIES
CONNECTORS
INPUT SIGNALS
470÷862MHz
87÷108MHz, 170÷240MHz
87÷108MHz, 170÷240MHz, 470÷862MHz
4 connectors F (3 Inputs UHF, 1 Input FM/DAB/B.III)
2 connectors F (RF OUT/Test-25dB)
75Ω
50÷73dBμV
60÷80dBμV
90dBμV (su tutta la banda)
10dB
34
key. Use the DOWN arrow to
key

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Saf-hd 7

Tabla de contenido