ANSMANN NL15AC-2USB Manual Del Usuario página 12

USE
The nightlight has an automatic twilight sensor.
Insert the mains plug of the nightlight into a properly
installed mains wall socket.
Thanks to the twilight sensor, the LED nightlight
switches on automatically when darkness falls and
switches off automatically during daylight.
Charging of devices via the USB ports:
In order to charge a device, such as a smartphone for
example, please use a suitable USB cable or the original
charge cable for your device. The nightlight has 2x
USB-A outputs.
Insert the USB plug of the cable into the nightlight and
the other end into your device.
The charge process starts automatically. Simultaneous
charging of multiple end-devices is possible with res-
trictions. This is dependent on the total required charge
current and charge voltage. Please disconnect your
device from the nightlight once the charging process
is complete.
The nightlight may heat up a little depending on the
output power required.
Never use the USB charging function of the nightlight
whilst unattended.
12
CLEANING AND CARE
Risk of electric shock!
Incorrect handling of the LED nightlight can result in an
electric shock.
CLEANING
§ Carry out cleaning tasks only when the mains plug is
removed from the mains power.
§ Let the LED nightlight cool down completely before
cleaning.
§ Use only a dry, lint-free cloth for cleaning.
§ Do not use scratching, hard objects or cleaning uten-
sils such as wire brushes or sponges for cleaning.
§ Do not use abrasive agents or solvents for cleaning.
CARE
Disconnect the device from the mains before cleaning
or before storing for an extended period of time.
DISPOSAL
Dispose of packaging after sorting by material type.
Cardboard and cardboard to the waste paper, film to the
recycling collection.
Dispose of the device in accordance with legal provi-
sions. The "waste bin" symbol indicates that, in the EU,
it is not permitted to dispose of electrical equipment
in household waste. Use the return and collection