Cleaning The Filter; Replacing The Filter - Avidsen Clair-X1 Manual Del Usuario

2 - RECOMMENDED INSTALLATION LOCATIONS
Can be used in all rooms up to a maximum of 40m
rooms, etc.
In adult
bedrooms
1 + 1
In classrooms

3- CLEANING THE FILTER

Note
Disconnect the power supply before cleaning by unplugging the mains adaptor and check that the ventilation has stopped. Risk of injury or electric
shock if the fi lter is changed while the purifi er is still running.
We do not recommend cleaning the fi lter with water as it may reduce the purifi er's performance and affect its fi ltering ability.
1. Disconnect the purifi er's power supply and unplug the mains adaptor.
2. Press the "Push" area on the upper cover to access the air inlet and check the fi lter condition.
3. Remove dust from the surface of the e2f fi lter using a vacuum cleaner.

4 - REPLACING THE FILTER

Filters have a maximum lifespan of 18 months, which may be reduced depending on the fi lter's location and the room in which it is used.
Note
Disconnect the power supply before changing the fi lter by unplugging the mains adaptor and check that the ventilation has stopped. Risk of injury
or electric shock if the fi lter is changed while the purifi er is still running.
1. Press the "Push" area on the upper cover to access the fi lter.
2. Pull the central handle on the fi lter and remove the e2f fi lter from the air purifi er.
3. Replace it with a new, clean fi lter.
2 : bedrooms, living rooms, children's bedrooms, libraries, offi ces, kitchens, studios, hospital
In children's In lounges
bedrooms
In hospital
In waiting rooms
(doctors, vets)
At the offi ce
In nurseries
rooms
In meeting
rooms
In open spaces
5 EN