Publicidad
Idiomas disponibles
Idiomas disponibles
HEAVY‑DUTY CORDLESS ROTARY HAMMERDRILL
DCH614
Congratulations!
You have chosen a D
WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No‑load speed
No‑load beats per minute
Single impact energy (EPTA 05/2009)
Optimum drilling range into concrete
Maximum drilling range in concrete
Maximum core drilling range in concrete
Tool Holder
Chisel positions
Collar diameter
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN60745‑2‑6:
L
(emission sound pressure level)
PA
L
(sound power level)
WA
K (uncertainty for the given sound level)
Drilling
Vibration emission value a
=
h, HD
Uncertainty K =
Chiselling
Vibration emission value a
=
h ,Cheq
Uncertainty K =
** Measured at the side handle. Side handle vibration is higher than vibration at
the main handle.
The vibration and/or noise emission level given in this information
sheet has been measured in accordance with a standardised test
given in EN60745 and may be used to compare one tool with
WALT one of the
e
another. It may be used for a preliminary assessment of exposure.
DCH614
V
54
DC
1
Li‑Ion
min
190–380
‑1
bpm
1450–2900
J
10.5
mm
16–32
mm
45
mm
40–125
SDS MAX
®
EC‑Declaration of Conformity
18
Machinery and Radio Directive
mm
66
kg
6.8
Heavy-Duty Cordless SDS MAX® Rotary Hammerdrill
dB(A)
93
DCH614
dB(A)
104
D
WALT declares that these products described under Technical
e
dB(A)
3
Data are in compliance with:
2006/42/EC, EN60745‑1:2009+A11:2010, EN60745‑2‑6:2010.
These products also comply with Directive 2014/53/EU and
m/s
2
8.8**
2011/65/EU. For more information, please contact D
m/s
2
1.5
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
m/s
2
8.1**
file and makes this declaration on behalf of D
m/s
2
1.5
Markus Rompel
Vice‑President Engineering, PTE‑Europa
D
WALT, Richard‑Klinger‑Straße 11,
e
65510, Idstein, Germany
06.04.2021
WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/or
noise should also take into account the times when the tool
is switched off or when it is running but not actually doing
the job. This may significantly reduce the exposure level
over the total working period.
Identify additional safety measures to protect the operator
from the effects of vibration and/or noise such as: maintain
the tool and the accessories, keep the hands warm (relevant
for vibration), organisation of work patterns.
EnGLIsh
WALT at
e
WALT.
e
27
Publicidad
