Fitting The Safety Guard; On/Off Switch - sunjoe 24V-GT10-CT Manual Del Operador

Fig. 4
Upper pole
assembly
Pole collar
2. Screw the pole collar on the thread to secure the poles
(Fig. 5).
Fig. 5
Pole collar

Fitting the Safety Guard

m
WARNING!
The safety guard must be properly installed.
The safety guard provides partial protection from the risk of
thrown objects to the operator and other bystanders.
1. Fit the safety guard in the groove on the motor housing, as
shown (Fig. 6).
Fig. 6
Lower pole
assembly
Safety guard
Groove
10
2. Hold the blade hub in place, use the safety guard screw to
fix the safety guard in place, as shown (Fig. 7).
Fig. 7
Safety guard
Operation
The cordless grass trimmer is designed to cut grass and
weeds under bushes, and on slopes that cannot be reached
with the lawn mower. The trimmer must be used outdoors only,
at an ambient temperature between 41ºF (5ºC) and
113ºF (45ºC).
m
WARNING!
Remove stones, small sticks and other
objects from the cutting area. The nylon blade will continue
to rotate for a few seconds after the trimmer is switched off.
Let the motor come to a complete stop before switching the
trimmer back on. Do not rapidly switch the trimmer off and on.
m
WARNING!
Rocks or debris may ricochet or be thrown
into eyes and face, cause blindness, or other serious injury.
Never lean over the trimmer head and always wear eye
protection.

ON/OFF Switch

TOOL ONLY
BATTERY + CHARGER SOLD SEPARATELY
In order to operate this cordless grass trimmer you will need
and a 24V iON+ System battery and charger. See page 14
for battery and charger options and specifications, or for
more information visit sunjoe.com.
1. Insert the battery into the battery compartment on the
back of the machine. Press until it clicks into position.
Press and hold the safety lock button, then squeeze the
ON/OFF switch. When the machine runs steadily, release
the safety lock button (Fig. 8).
Safety guard
screw