Setting The Clock; Quick Start - tomado TMS2002B Manual Del Usuario

página de 105

/ 105
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

As soon as the microwave oven is plugged in, it will display 0:00 and the buzzer will ring once.

• Press the button CLOCK once. The display shows 00:00.

• Turn

to adjust the hour. The input should be between 0-23 (24 hour).

• Press the button CLOCK again and the minutes will flash.

• Turn

to adjust the minutes. The input should be between - 0-59.

• Press the button CLOCK again to confirm the time. The colon ":" will blink.

- If the clock is not set, it would not function when powered. The display will show 0:00.

- If you press STOP during the process of setting the clock the microwave oven will return to the previous setting.

• Press the button MICROWAVE and the display will show P100. Press the button MICROWAVE repeatedly to change the

power or use

- P100-P80-P50-P30-P10.

• Press the button START/+30 SEC. to confirm the power.

• Turn

to adjust the cooking time. The cooking time can be set from 0:05 to 95:00.

•

Press the button START/+30 SEC. again to confirm the cooking time and start the microwave.

Microwave power

P10 = 70 Watt

P30 = 210 Watt

P50 = 350 Watt

P80 = 560 Watt

P100 = 700 Watt

The step quantities for adjusting the time are as follows:

0-1 minute

: 5 seconds

1-5 minutes

: 10 seconds

5-10 minutes

: 30 seconds

10-30 minutes : 1 minute

30-95 minutes : 5 minutes

• Press the button START/+30 SEC. to cook with full power (700 Watt) for 30 seconds. Each press on the same button increases

the time with 30 seconds. The maximum is 95 minutes.

• Turn

to the left to set the cooking time instantly and press START/+ 30 SEC. to heat the microwave to full power (700

Watt).

• During the microwave and time defrost process, press the button START/+30 SEC. to increase the cooking time with 30

seconds. When pressed repeatedly on the same button the time increases with 30 seconds.