User instructions
Before first use
Please note that there may be a faint smell when using the 5 Qt. Programmable
Slow Cooker for the first time. This is dust burning off that has been collected in
storage at the manufacturer. This faint smell will eventually go away after the
first few uses.
Unpack the slow cooker and other necessary parts from the box.
Remove any unwanted packaging materials such as cardboard, plastics or
styrofoam.
Wipe clean all the parts with a soft damp cloth or sponge. Rinse and dry
thoroughly. DO NOT USE ANY ABRASIVE MATERIALS TO CLEAN THE SURFACE.
DO NOT IMMERSE THE SLOW COOKER BASE INTO WATER AT ANY TIME.
Assemble all the parts to the slow cooker.
How to use
1. Always set your slow cooker on a level and stable heat resistant surface. Make
sure the feet are setting securely on the table or counter.
2. Prepare your recipe according to the directions
3. Assemble your ingredients in the ceramic pot and place the pot into the base.
Cover with the glass lid. If you need to pre-cook or brown foods prior to slow
cooking, this must be done in a pan on the stove, not in the slow cooker.
4. To begin cooking, plug the power cord into an outlet. The unit will beep and 4
blue dashes will appear in the display window.
5. Press the TEMP button once. This will turn the unit on and 08:00 will flash in
the display window. This sets the temperature to the LOW setting and the
time will begin to count down from 8 hours. The light below the word LOW
will turn on.
6. Press the TEMP button a second time and 04:00 will flash in the display
window. This changes the temperature to the HIGH setting and the timer will
start counting down from 4 hours. The light below the word HIGH will turn on.
User instructions
7