Felisatti DC10/14,4L2 Manual Del Usuario página 5

• Charge only Felisatti approved rechargeable
batteries. Other types of batteries may burst
causing personal injury and damage.
• Do not disassemble battery.
Incorrect reassembly may result in a risk of
electric shock, electrocution or fire.
• Accessories may be hot after prolonged use.
When removing the bit from the tool avoid contact
with skin and use proper protective gloves when
grasping the bit or accessory.
• Keep the battery from being overheated.
If overheated battery is inserted, high temperature
stand by is indicated and charging can only start
after the battery has been cooled down. When the
battery is overheating due to continuous operation,
in order to protect the battery performance will
automatically shut off the power.
• Leaving the battery for a prolonged time
without using it will shorten the life of the
battery.
• If the battery is to be stored for a prolonged
time, charge it completely before storing it.
To use the battery for a long period of time, charge
it completely every 3 months.
• If drill stalls, it is usually because it is being
overloaded or improperly used.
Release trigger immediately.
Do not click trigger on and off in an attempt to start
a stalled drill. This can damage the drill.
5