HSM Primo 1501 Instrucciones De Servicio página 11

4
Machine components
1 2 3
1 Cut material container
2 Safety instructions
3 Feed opening
4 LEDs
Paper shredder is ready for operation.
Cut material container full or open
5 Rocker switch
: On
: Off, Reverse
6 Name plate
08/2011
All manuals and user guides at all-guides.com
4 5 6
HSM GmbH + Co. KG
Austrasse 1
88699 Frickingen / Germany
Made in Germany
Modell Spannung
Masch.-Nr. Nennstrom
Seriennummer Leistung
Schnittbreite Baujahr
5 Operation
WARNING
Before switching the machine on,
make sure that you observe all
safety instructions.
Switching the paper shredder on
• Press rocker switch
Rocker switch locks in place.
Green LED lights.
Paper shredder is ready for op-
eration (standby).
Feed paper
• Insert the paper to be de-
stroyed. See "Technical data"
for sheet capacity.
star ted by a pho to –cell in the
paper feeding opening.
system and shredded.
opening is free again, the
cut ting sy stem au to ma tical ly swit ches off
af ter app rox. 3 sec. and returns to standby.
Shredding CDs and credit cards (see
"Proper Use")
WARNING
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card in centre of the feed
opening.
Swit ching paper shredder off
• Tap rocker switch
Switch returns to ze ro po si ti on.
Primo 1501
english
.
The shredding pro cess is
Paper is pulled into cutting
When the paper fee ding
.
11