THERMEx PUREMEX 5 Manual De Instrucciones página 47

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

M 7402110302 17022021
IMPORTANT:
The electrical connection must correspond to the electrical requirement
noted on the rating plate, which is placed inside the cooker hood. The
appliance should not be connected to the electrical supply while install
After fixed, check that the appliance is operating correctly by selecting
each speed and switching the light bulbs on and off.
This hood is only use in recirculation style which must be with carbon or
plasma filter.
3) Fix the transparent steel wire with
the special screw (wire locker) onto the
hanging plate & connect Power cable
in the right way. Pls adjust the steel
wires with suitable length to insure the
main body of the cooker hood in a right
position for use.
IMPORTANT: This stage of the
installation
process
completed by two people.
IMPORTANT: make the same
length of the 4 fixing wires to let the
hood in balance level
4) Push the hanging plate cover up to
the hanging board which installed the
magnet can fix the cover.
5
ThERMEX PUREMEx 5
MUST
be
47

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido