Fujitsu Airstage AS-E07L Serie Manual De Funcionamiento página 4

MANUAL AUTO OPERATION
Use the MANUAL AUTO operation in the event the remote control unit is lost or otherwise unavailable.
Do not press the MANUAL AUTO button with wet hands or pointed objects, otherwise an electric
CAUTION!
shock or malfunction may occur.
Starting operation
Press the MANUAL AUTO button on the operating control panel.
The operation can be set in the following setting.
Operation mode AUTO
Fan speed AUTO
Setting temperature 23˚C
Stopping operation
Press the MANUAL AUTO button on the operating control panel.
ADJUSTING THE DIRECTION OF AIR CIRCULATION
The vertical wind direction can be controlled with the control unit. The horizontal wind direction can be manually set by
adjusting Right-Left Louvers.
Vertical direction
1
2
3
4
Cooling & Dry : 1, 2, 3, 4
: 1, 2, 3, 4
Heating
En-3
When Auto mode cannot be selected, it will operate in the same mode as the
other indoor unit in the same system. (When other indoor unit in the same
system doesn't operate, the air conditioner will operate in cooling.)
Horizontal direction
knob(three places)
Right-Left Louvers
knob