1.7.5 Sealed Reversing Contactor Installation Continued
• Sealed reversing contactor designed to control
direct current motors as used on winches, cranes,
vehicles, etc.
• IP66 rating per IEC60529 (suitable for submersible
purpose)
• Silver alloy contact material.
• Mono-block constructions is compact in size and
light weight
Performance Data
Thermal current rating (100%): 75 Amperes
Intermittent current rating:
5% Duty . . . . . . . . . . . . . . . . . . .300 Amperes
30% Duty . . . . . . . . . . . . . . . . . .140 Amperes
50% Duty . . . . . . . . . . . . . . . . . .110 Amperes
70% Duty . . . . . . . . . . . . . . . . . .85 Amperes
Typical fault currents can be ruptured
(5ms time con-stant) . . . . . . . . . . . .400 A at 48V DCx
Typical voltage drops across contacts
Per 100 Amperes . . . . . . . . . . . . . 40mV
Mechanical Life . . . . . . . . . . . . . .> 5 X 1000000
Maximum pull-in voltage (coil at 20°C)
Intermittently Rated Types. . . . . .60% V
Continuously Rated Types . . . . .66% V
Typical Drop-Out Voltage . . . . . .10—20% V
1.8 Know your Wireless Remote
WARNING
Never lose sight of the winch or jack while using the wireless remote.
Never touch the winch or jack while the remote is in someone else's hands.
Wireless
Switch Cord W/3Pin plugs
Receiver
Ø8 X 1500 mm
1.8.1 Wireless Remote and Transmitter Specifications
1. Transmission range:15 ~ 27 m (50 ~ 90 ft)
2. Receiver operation voltage: 8 ~ 24 V
3. Receiver fuse current rating: 7.5 A
4. Protection: IP-66
5. Operating temperature range: -20°C ~ +70°C
6. LED indication: Green light for power on; Red light
for operating; Blinking green for low battery life;
Blinking red light for poor signal received
CEQUENT
Installation Instructions
Figure 19 - Wireless Remote Components
PERFORMANCE PRODUCTS, INC. •
™
Figure 17 - Sealed Reverse Contactor
Wireless
Lithium Battery:
Transmitter
F3838-00 REV C (4782) 7/15
Figure 18 - Connection Diagram
3V CR2032
Figure 20 - Wireless Remote
LED Indication
Transmitter
Strap
15