Bosch Professional GBH 2-25 Manual Original página 15

Intended Use
The power tool is intended for hammer drilling in concrete,
brick and stone, as well as for light chiselling work. It is also
suitable for drilling without impact in wood, metal, ceramic
and plastic. Power tools with electronic control and right/left
rotation are also suitable for screwdriving.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Keyless quick-change chuck (GBH 2-25 F, GBH
2-26 F)
(2) SDS plus quick-change chuck (GBH 2-25 F, GBH
2-26 F)
(3) SDS-plus tool holder
(4) Dust protection cap
(5) Locking sleeve
(6) Locking ring for quick-change chuck (GBH 2-25 F,
GBH 2-26 F)
(7) Rotational direction switch
(8) Lock-on button for on/off switch
Technical Data
Rotary hammer
Article number
Speed control
Stop rotation
Clockwise/anticlockwise rota-
tion
Quick-change chuck
Rated power input
Impact rate
Impact energy per stroke ac-
cording to EPTA-Proced-
ure 05:2016
No-load speed
Tool holder
Spindle collar diameter
Max. drilling diameter
– Concrete
– Masonry (with hollow core
bit)
– Steel
– Wood
Weight according to EPTA-
Procedure 01:2014
Protection class
The specifications apply to a rated voltage [U] of 230 V. These specifications may vary at different voltages and in country-specific models.
Bosch Power Tools
(9)
(10)
(11)
(12)
(14)
(15)
(16)
(17)
(18)
(19)
(20)
(21)
(22)
(23)
(24)
a) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GBH 2-25 GBH 2-25 F
3 611 B53 5.. 3 611 B54 6..
●
●
●
−
W 790
-1
min 0–4000
J 2.5
-1
min 0–1300
SDS-plus
mm 50
mm 26
mm 68
mm 13
mm 30
kg 2.7
/ II
On/off switch
Release button for impact/mode selector switch
Impact/mode selector switch
Button for depth stop adjustment
Auxiliary handle (insulated gripping surface)
Handle (insulated gripping surface)
a)
Securing screw for keyed chuck
a)
Keyed chuck
a)
SDS-plus shank for drill chuck
Drill chuck holder (GBH 2-25 F, GBH 2-26 F)
Front sleeve of the keyless quick-change chuck
(GBH 2-25 F, GBH 2-26 F)
Retaining ring of the keyless quick-change chuck
(GBH 2-25 F, GBH 2-26 F)
a)
Dust extraction (GDE 16 Plus)
a)
Dust collection cap
Universal holder with SDS-plus shank
GBH 2-26
3 611 BA3 0..
● ●
● ●
● ●
● −
790 830
0–4000 0–4000
2.5 2.7
0–1300 0–1300
SDS-plus SDS-plus
50 50
26 26
68 68
13 13
30 30
2.9 2.7
/ II / II
1 609 92A 626 | (12.01.2022)
English | 15
a)
GBH 2-26 F
3 611 BA4 0..
●
●
●
●
830
0–4000
2.7
0–1300
SDS-plus
50
26
68
13
30
2.9
/ II