Eldom sliss Manual De Instrucciones página 9

GENERAL DESCRIPTION
1. Switch - I + II speeds
2. Blade
3. Base
4. Carriage
5. Guard
6. Body
7. Guide
8. Slice thickness regulator
TECHNICAL DATA
- power: 150W
- supply voltage:
230V ~ 50Hz
- allowed uninterrupted
operation: 10 minutes
- pause before restarting
operation: 30 minutes
- the range: 1–15 mm
INTENDED USE
The KR350 slicer is designed to slice various types of hard food products, in particular bread, cured
meat, meat, cheese, vegetables, fruit, etc.
HOW TO USE
Before the first use:
- read thoroughly this guidebook.
- Make sure that all elements are free of damages.
- Wash the elements that come into contact with food.
OPERATION
- Place the body (6) on flat, hard and stable ground.
- Make sure that the appliance is disconnected from the mains and the switch (1) is set in the "O"
position.
- Move the carriage (4) several times back and forth to make sure that it moves freely.
- Place food products on the carriage (4). In case of slicing small bits, pit the guard (5) on the carriage
(4).
- Maximum dimensions of the product to be sliced: 110x110x90 mm (length x width x thickness).
- Select the required slicing thickness with the adjustment knob (8): turning left results in thinner
slices, turning right produces thicker slices.
- Connect the appliance to the network compliant with the parameters stated on the device and
start it with the switch (1).
- When the blade starts spinning, push the carriage (4) with the product towards the blade, and
then slide it back and forth. Press the product gently to the guide.
All manuals and user guides at all-guides.com
OPERATING INSTRUCTION
1
8
7
ELECTRIC SLICER KR350
2
3
4
5
6
fig
. 1
EN
fig
. 2
fig
. 3
•
EN 9