Cleaning And Maintenance - Bimar JST-705MS Manual De Instrucciones

Fax +32 030 9904733

Never leave the appliance connected to the socket if it is not in use, especially for long
periods.

CLEANING AND MAINTENANCE

Attention: before cleaning the appliance, switch off, unplug and wait for before it has
completely cooled down.
• Protect the parabola from dust to keep save its reflecting characteristic.
• To clean the body use a soft damp cloth; do not use abrasive products.
• The protection grill is very delicate; to clean them only use your vacuum cleaner, paying
attention not to damage them.
• When the stove is not in use it is necessary to cover and put it in a dry place. We advise to
use the original packing to preserve it from dust and humidity.
• The heaters must be substituted with a special tool: please contact a competent qualified
electrician.
• If you decide not to use the appliance any more, we recommend making it inoperative by
cutting the power cord (after making sure you have disconnected the plug from the socket)
and make dangerous parts harmless if children are allowed to play with them.
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN
ACCORDANCE WITH EC DIRECTIVE 2011/65/EC.
At the end of its working life, the product must not be disposed of as urban waste. It must be taken to
a special local authority differentiated waste collection centre or to a dealer providing this service.
Disposing of a household appliance separately avoids possible negative consequences for the
environment and health deriving from inappropriate disposal and enables the constituent materials to
be recovered to obtain significant savings in energy and resources. As a reminder of the need to
dispose of household appliances separately, the product is marked with a crossed-out wheeled
dustbin.
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Bimar
(Italy). The pages must be reproduced and folded in
order to obtain a booklet A5 (+/- 148.5 mm width x 210
mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't
change the page numbering. Keep the language
integrity.
9 24
/
Assembly page 9/24