Adjusting The Footrests; Final Inspection - Bellelli B-FIX RELAX Manual De Instrucciones

EN EN

Adjusting the footrests

Turn the catch lever on the rear of the footrest upwards (fig. Q).
Adjust the footrest (25) upwards or downwards until you reach the desired position.
Close the locking lever by pushing it down until you hear a click.
Adjusting the Angle of the Seat
Turn the handle (16) of the slide (15), to change the inclination of the seat (fig. R).

Final Inspection

WARNING: Do not conduct the final inspection with the child in the seat.
Push the bike for a few meters by hand, making sure that no moving parts touch the seat, no
protruding straps are close to the wheels and brakes and that pedals are still in good condition.
Check that the fastening system is adequately attached to the bicycle frame and the seat is correctly
hooked in the fastening system.
Placing the child in the seat
Press the button of the middle buckle (20) until you hear a click indicating that the sprocket is
unhooked (fig. S). Pull the buckle upwards to take it off.
Place the child in the seat.
Push the straps through on the side of the child's head (fig. T).
Place the middle buckle through the opening (Fig. U). Slide the buckle through the opening until you
hear a click.
Adjust the loops (18) on the strap, so that it rests better on the body of the child (fig. V).
Place the feet of the child on the footrests.
Close the straps (23) by attaching them on the pins on the back of the footrests (fig. Z).
Removing the child from the seat
Loosen the straps holding the feet.
Press the button of the middle buckle (20) until you hear a click indicating that the sprocket is
unhooked.
Pull the buckle upwards to take it off.
Pull the straps over the child's head.
MAINTENANCE
Wash the seat regularly with soap and water. Do not use aggressive detergents.
GUARANTEE
The warranty terms can be found on the warranty web page.
RECYCLING
1. PP
2nd Iron
3. Iron
4. PA
20