Haier HSU-24H03/Z Manual De Funcionamiento página 13

Operation
Comfortable SLEEP
Before going to bed at night, you can simply press
the SLEEP button and unit will bring you a sound
sleep in selected mode.
In COOL mode
One hour after SLEEP mode starts, temp. will
o
become 1 C higher than temp. setting. After
running for another 1 hour, temp. rises by 1
further. Unit will run for 6 hours then stops
automatically. Temp. is higher than temp.
setting so that room temp. won't be too low
for your sleep.(As shown in Fig.l)
In HEAT mode
One hour after SLEEP mode starts, temp. will
o
become 2 C lower than temp. setting. After
running for another 1 hour, temp. decreases
o
by 2 C further. Unit will run for 3 hours at this
temp. then increases another 1
automatically 3 hours later. Temp. is lower
than temp. setting so that room temp. won't
be too high for your sleep.
(As shown in Fig .2)
Power Failure Resume Function
If the unit is started for the first time, the
compressor will not start running unless 3
minutes have elapsed. When the power
resumes after power failure, the unit will run
automatically, the power indicator lights up, and
3 minutes later the compressor starts running
with the indicator lighting up.
Note:
In AUTO mode, unit will run in SLEEP
function according to operation mode.
In FAN mode, comfortable sleep is not
available.
All manuals and user guides at all-guides.com
o
C
o
C and stops
12
ON/OFF
MODE
FAN
SWING
SLEEP
LOCK
SLEEP operation starts
1 hr
Rises 1
o
1 hr Rises 1 C
Temp. setting
Fig.1
Temp. setting
decreases 2
1 hr
decreases 2
1 hr
3 hrs
SLEEP mode starts
Fig.2
TEMP
SET
TIMER
CLOCK
RESET
SLEEP operation stops
Approx. 6 hrs
o
C
Unit stop
Unit stop
o
C
o
C
Approx. 3 hrs
o
Rises 1 C
SLEEP mode stops