Impact Driver Safety Warnings; Residual Risks - Würth ASS 18-1 Manual Del Usuario

Keep handles and grasping surfaces dry, clean and free from
oil and grease. Slippery handles and grasping surfaces do not
allow for safe handling and control of the tool in unexpected
situations.
Battery tool use and care
A charger that is suitable for one type of battery pack may create
packs. Use of any other battery packs may create a risk of injury
When battery pack is not in use, keep it away from other
metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from
one terminal to another. Shorting the battery terminals together
Under abusive conditions, liquid may be ejected from the
with water. If liquid contacts eyes, additionally seek medical
help. Liquid ejected from the battery may cause irritation or burns.
temperature.
cause explosion.
Follow all charging instructions and do not charge the battery
instructions. Charging improperly or at temperatures outside the
Service
using only identical replacement parts. This will ensure that the
safety of the power tool is maintained.
Never service damaged battery packs. Service of battery packs
should only be performed by the manufacturer or authorized
service providers.

Impact Driver Safety Warnings

Hold the power tool by insulated gripping surfaces, when
performing an operation where the fastener may contact
hidden wiring.
operator an electric shock.
Secure your workpiece with a clamping device. A workpiece
clamped with clamping devices or in a vice is held more secure
than by hand.
Always wait until the product has come to a complete stop
before placing it down. The tool insert can jam and lead to loss
of control over the power tool.
Do not open the battery. Danger of shortcircuiting.
Protect the battery against heat, e.g., against continuous
In case of damage and improper use of the battery, vapours
may be emitted. Provide for fresh air and seek medical help in
case of complaints. The vapours can irritate the respiratory system.
Use the battery only in conjunction with your Würth power
tool. This measure alone protects the battery against dangerous
overload.
Use only original Würth batteries with the voltage listed on
the nameplate of your power tool. When using other batteries,
e. g. imitations, reconditioned batteries or other brands, there is
danger of injury as well as property damage through exploding
batteries.
Use only original Würth accessories.
Even when the product is used as prescribed, it is still impossible to
completely eliminate certain residual risk factors. The operator should
pay particular and additional attention to these points in order to
reduce the risk of serious personal injury.
Injury to hearing – Wear suitable ear protection and limit
exposure.
Injury to sight – Wear protective eye shields or goggles when
using the product.
Injury caused by vibration – Limit exposure and follow the
instructions on risk reduction in this manual.
Electric shock after contact with hidden wires – Hold the product
only by insulated surfaces.
Respiratory injury from dust created by operating the product –
Wear suitable protection depending on type of dust.
1/4" cordless impact driver
Article number
Voltage
Tool mounting
No load speed
- Gear 1
- Gear 2
- Gear 3
Maximum torque
- Gear 1
- Gear 2
- Gear 3
Blows per minute
Weight (According to EPTA procedure
01/2014)
Weight - not incl. battery pack
Ambient operating temperature for the
tool and battery pack
Danger of explosion.
Ambient storage temperature for the
tool and battery pack

Residual Risks

ASS 18-1/4"
5701 415 000
0 - 750 min
0 - 2200 min
0 - 3000 min
0 - 4000 min
1,53 kg (2,0 ah) - 1,8
COMPACT
18 V/DC
-1
-1
-1
65 Nm
230 Nm
295 Nm
-1
kg (5,0 ah)
1,1 kg
0 - 40°C
0 - 27°C
15