Product Description - Concept ZK4020 Manual De Instrucciones

EN

PRODUCT DESCRIPTION

1 Nozzle
2 Power button
3 Display
4 Device body
5 Nozzle release button
6 Water tank
7 Basic cleaning nozzle
8 Nozzle for teeth with braces
9 Nozzle for cleaning the tongue
1
2
3
4
46
5
7 8 9
6
OPERATING INSTRUCTIONS
Charging
• Fully charge the battery before using the device for the first time.
• If the device has not been used for more than 3 months, charge it for more than 15 hours.
• Charge only when the battery is low.
• To make better use of the battery, we recommend discharging the battery once a year.
Preparation
• Fill the tank (Fig. 1) with water and close it tightly.
• Use tap water or heated water.
• Do not use salt water, toothpaste or chemicals.
• Attach the nozzle (Fig. 2).
If the device is switched on but the water does not spray out:
• Make sure there are no foreign objects in the nozzle.
• Fill the water tank with water.
• Turn on the device and carefully turn it upside down several times OR remove the nozzle, turn on the device and
pour water into the nozzle socket.
Use
• Insert the nozzle into your mouth towards your teeth and lean over the sink (Fig. 3).
• Turn on the device.
• Hold the device vertically with the nozzle pointing up.
• Close your mouth so that the water does not spray out.
• Move smoothly along the teeth (Fig. 4).
• A full tank lasts for approx. 45 seconds of use.
Fig. 1
3 modes (Fig. 5)
Normal - regular cleaning
Soft - gentle cleaning of teeth and gums
Pulse - effective removal of residues and plaque
To set the mode, press the power button. To stop the
water flow, press the button for 5 seconds.
ZK4020 ZK4020
Fig. 2 Fig. 3
Fig. 5
EN
Fig. 4
47