Home Decorators Collection HAYES Guía De Uso Y Cuidado página 6

Installation (continued)
3
Attaching the backsplash
Mount the backsplash (B) to the wall.
Apply adhesive (not included) to the
unpolished back side and bottom of the
backsplash (B). Position the backsplash
(B) as shown on the top of the vanity (A) and
against the wall.
Clean any excess adhesive before
allowing to dry.
B
NOTE: Install the faucet and drain set
(not included) according to the
manufacturer's directions. Vanity (A)
is designed to use a standard 8 in.
widespread faucet.
4
Installing the shelf
Place the shelf pins (AA) in the pre-drilled holes at the
desired height.
Place the shelf (C) on the shelf pins (AA).
AA
6
C