Cleaning Your Blender - ChefScape L5746 Manual De Instrucciones

Before using your Chefscape
to thoroughly wash the blending jar, blender blade base, smoothie blade base,
dispensing valve, lid and stir stick. To prolong the life of your Chefscape
do not wash plastic parts in the dishwasher. Open the dispensing valve while
washing to rinse out the valve. After each use, unscrew and disassemble the
dispensing valve for cleaning (see instructions below).
Lever
Cap
Spring
Stopper Pin
Stopper
Valve Body
1. Remove the valve from the smoothie blade base by unscrewing the entire valve
counter-clockwise.
2. Remove the cap from the valve body by unscrewing it counter-clockwise.
3. Squeeze cap and stopper together and slide the lever off the stopper pin.
4. Remove the spring.
5. Remove the stopper and stopper pin by pulling the rubber rim of the stopper.
The stopper and pin are tightly fit and need not be separated.
6. Clean all parts in warm, soapy water, allow to dry thoroughly and reassemble in
the order shown.
C Y
LEANING OUR
™
Blender for the first time and after each use, be sure
8
B
LENDER
™
Blender,