Cleaning And Maintenance - Princess Grind & Brew Manual Del Usuario

• Repeatedly press the hour button (6) to set
the hours.
• Repeatedly press the minute button (7) to
set the minutes.
• Set the coffee quantity. Refer to the
section "Setting the coffee quantity".
• Set the coffee strength. Refer to the
section "Setting the coffee strength".
• If you want to make coffee with ground
coffee, switch off the grinding function
before using the delay start function.
• Press the timer button (5) to save the
settings. The timer indicator (C) lights
continuously.
• To interrupt the process, press the timer
button (5) again. The timer indicator (C)
goes off.

Cleaning and maintenance

Before you proceed, we need you to pay
attention to the following notes:
- Before cleaning or maintenance, always
switch off the appliance, remove the mains
plug from the wall socket and wait until
the appliance has cooled down.
- Do not immerse the appliance in water or
any other liquids.
Before you proceed, we would like you to
focus your attention on the following notes:
- Do not use aggressive or abrasive cleaning
agents to clean the appliance.
- Do not use sharp objects to clean the
appliance.
• Regularly check the appliance for possible
damage.
• Clean the accessories:
- Clean the coffee pot in soapy water.
- Clean the coffee filter holder in soapy
water.
- Clean the lid of the coffee bean
compartment in soapy water.
- Thoroughly dry the accessories.
• Clean the outside of the appliance with
a damp cloth. Dry the outside of the
appliance with a clean, dry cloth.
• Put the appliance and the accessories in
the original packaging.
• Store the appliance in a dry and frost-free
place, out of the reach of children.
Cleaning the grinding compartment
(fig. C & I)
When grinding coffee beans, coffee powder
can clog the grinding mechanism. The grinding
compartment (19) can be cleaned every
2 weeks to prevent the grinding mechanism
from being clogged.
Before you proceed, we would like you to
focus your attention on the following notes:
- Before cleaning the grinding compartment,
take the following actions:
- Switch off the appliance.
- Remove the mains plug from the wall
socket.
- Remove the coffee pot from the heating
plate.
- Empty the coffee filter holder. Place a
suitable coffee filter. Close the filter
holder assembly.
• Remove the cover (28).
• Clean the grinding compartment (19) using
the brush (21).
• Mount the cover (28).
Descaling the appliance (fig. A - D)
The appliance must be descaled after each 70
brewing cycles. If you leave the mains plug in
the wall socket, the appliance will keep track
of the number of brewing cycles. The indicator
(D) will flash on the display to indicate that
the appliance must be descaled. If the
appliance must be descaled, use a suitable
descaling agent. Special descaling agents are
available from our service station.
Before descaling the appliance, the old carbon
filter must be removed from the water
reservoir. The carbon filter removes chlorine
and other contaminants from the water for a
pure coffee taste. After descaling the
appliance, a new carbon filter must be placed
in the water reservoir. New carbon filters are
available from our service station.
16