General; Introduction; References To Copyright And Industrial Property Rights; Notes For The Operating Company - Kemper MaxiFil Clean Instrucciones De Servicio

1 General

1.1 Introduction

This manual is an essential aid for the proper and safe operation of the
product.
These operating instructions contain important information to ensure safe,
proper and efficient operation of the product. Observing these instructions
helps avoiding danger, reducing repair costs and downtimes and
increasing the reliability and service life of the product. The operating
instructions must be kept available at all times and have to be read and
applied by every person who is assigned to work on or with the product.
These include amongst others:
• the operation and troubleshooting during operation
• the maintenance (care, maintenance, repair)
• the transport
• the assembly
• the disposal
Technical modifications and errors expected.

1.2 References to copyright and industrial property rights

These Operating Instructions should be kept confidential. They should be
made accessible only to authorised persons. They may be passed on to
third parties only with the written consent from KEMPER GmbH, referred
to as manufacturer in the following.
All documents are protected under the Copyright Act. The reproduction
and distribution of documents, including excerpts, as well as re-use and
passing on of their contents is not permitted. Unless this is expressly
permitted in writing.
Violations are liable to prosecution and liable for damages. The
manufacturer reserves the right to exercise all intellectual property rights.

1.3 Notes for the operating company

The operating instructions are an essential part of the product.
The operating company must ensure that the operating personnel is aware
of the contents of this manual.
Based on national regulations for accident prevention and environmental
protection, the operating instructions are to be supplemented by the
operating company's own operating instructions, including information on
regulatory and reporting requirements to meet specific operating
requirements, such as work organisation, work flow and staff employed. In
addition to the operating instructions and the relevant obligatory
1502827-03 - 44 -
EN