Keypad; Operation; To Check The Accuracy Of Line Laser Level - Instrumax 3D RED Manual De Instrucciones

4
2. Horizontal laser window

3. Keypad

4. Compensator switch
5. Battery compartment
6. Tripod mount 1/4''
7. Hole for charger connection
8. Rotating base (In leveling mode use the adjusting knob to
rotate the instrument around the down dot by 180°)
3
Keypad
1. Vertical line button
2. Horizontal line button / Detector mode
3. Laser lines LED / TILT LED
4. Detector LED

Operation

INSTRUMAX 360 RED is a reliable and convenient instru-
ment. It will be irreplaceable instrument for many years.
Compensator switch (4) has 3 positions:
1. Switch OFF (OFF). The instrument is switched off, pendu-
lum is locked, keypad is inactive.
2. Inclination position. The instrument is ON, pendulum is
locked, keypad is active. It is possible to switch on (off) ver-
tical or horizontal lines, detector mode with buttons (1) and
(2). Laser lines are projected at any angle.
3. ON position (ON). The instrument is switched on, pendu-
lum is unlocked, it self-levels. It is possible to switch on (off)
vertical or horizontal lines, detector mode with buttons (1)
and (2). If the instrument is out of self-leveling range (±4º),
all laser lines and indicator (3) stasrts blinking. Sound alarm.
Detector mode. Use detectore mode when operating in
bright sunlight. Press button (2) to activate this mode. In-
dicator (4) lights up. Place the detector to the approximate
location of the beam. Follow the instruction while searching
laser beam.
Transportation
Move the switch (4) into position OFF. Place the instrument
into the soft bag or case. Do not drop the instrument during
transportation.

To check the accuracy of line laser level

To check the accuracy of line laser level (slope of plane)
Place laser level on the tripod 5m away from the wall so the
4