Singercon CON.LMHZ-36/10/RGBW Manual De Instrucciones página 6

EN
c) In case of fire, use a powder or carbon dioxide
(CO ) fire extinguisher (one intended for use on live
2
electrical devices) to put it out.
d) Use the device in a well-ventilated space.
e) Please keep this manual available for future reference.
If this device is passed on to a third party, the manual
must be passed on with it.
f) Keep packaging elements and small assembly parts in
a place not available to children.
g) Keep the device away from children and animals.
h) If this device is used together with another
equipment, the remaining instructions for use shall
also be followed.
2.3. PERSONAL SAFETY
a) Do not use the device when tired, ill or under the
influence of alcohol, narcotics or medication which
can significantly impair the ability to operate the
device.
b) The device is not designed to be handled by persons
(including children) with limited mental and sensory
functions or persons lacking relevant experience and/
or knowledge unless they are supervised by a person
responsible for their safety or they have received
instruction on how to operate the device.
c) The device can be handled only by physically fit
persons who are capable of handling it, properly
trained, familiar with this manual and trained within
the scope of occupational health and safety.
d) The device is not a toy. Children must be supervised
to ensure that they do not play with the device.
2.4. SAFE DEVICE USE
a) Disconnect the device from the power supply
before commencement of adjustment, cleaning and
maintenance. Such a preventive measure reduces the
risk of accidental activation.
b) When not in use, store in a safe place, away from
children and people not familiar with the device who
have not read the user manual. The device may pose
a hazard in the hands of inexperienced users.
c) Keep the device in perfect technical condition. Before
each use check for general damage and especially
check for cracked parts or elements and for any other
conditions which may impact the safe operation of
the device. If damage is discovered, hand over the
device for repair before use.
d) Keep the device out of the reach of children.
e) Device repair or maintenance should be carried out
by qualified persons, only using original spare parts.
This will ensure safe use.
f) Avoid situations where the device stops working
during use due to excessive loading. This may result
in overheating of the drive elements and damage to
the device.
g) Do not move, adjust or rotate the device in the course
of work.
h) Do not leave this appliance unattended while it is in
use.
u) Clean the device regularly to prevent stubborn grime
from accumulating.
j) The device is not a toy. Cleaning and maintenance may
not be carried out by children without supervision by
an adult person.
k) It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
10
l) Keep the device away from sources of fire and heat.
m) Do not overload the device.
n) Do not cover the ventilation openings!
o) Always move / mount the device holding it by the
base, never by the head!
p) The head heats up during operation. For maintenance,
adjustment, dismantling or transport allow the device
to cool down after switching it off.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there is
still a slight risk of accident or injury when using the
device. Stay alert and use common sense when using
the device.
3. USE GUIDELINES
The LED moving head is a lighting device intended only
for entertainment, exhibition and architectural purposes.
Not suitable for home lighting. The head can be used as a
standing device or mounted on a lighting ramp.
The user is liable for any damage resulting from
unintended use of the device.
3.1. DEVICE DESCRIPTION
CON.LMHZ-36/10/RGBW CON.LMH-7/10/RGBW
3
2
1
1. The base has a control panel (on the front) and a
power cable and DMX input (on the back). (The CON.
LMHZ-36/10 / RGBW model also has an on / off
switch.)
2. Movable grip
3. The head
3.2. PREPARING FOR USE
APPLIANCE LOCATION
The temperature of environment must not be higher than
40°C and the relative humidity should be less than 85%.
Ensure good ventilation in the room in which the device
is being used. There should be at least 50 cm distance
between each side of the device and the wall or other
objects. Keep the product away from hot surfaces. The
device should always be used when positioned on an
even, stable, clean, fireproof and dry surface, and be out
of the reach of children and persons with limited mental
and sensory functions. Position the device such that you
always have access to the power plug. The power cord
connected to the appliance must be properly grounded
and correspond to the technical details on the product
label.
NOTE: If the devices are mounted on a ramp or other
structure, they must be secured so as make it impossible to
pass directly under the LED heads.
ASSEMBLING THE APPLIANCE
The device can be mounted on a lighting ramp. Before
assembly, make sure that the structure to which the device
will be attached is stable and its carrying capacity is 10
times the weight of the device. To mount the device on
a ramp, screw the connector to the base and screw the
special hook to the connector.
Before turning on, make sure that the assembly is correct
and the screws are tightened securely. When installing
and using the device on a ramp, use a safety cable with a
strength of 12 times the weight of the device.
An example of the correct installation of the LED head on
the lighting ramp:
3.3. DEVICE USE
Note: the device has a memory function. After setting the
desired lighting effect, press ENTER. After the next start, the
3
device will turn on with the function previously set.
3.3.1. MODEL CON.LMHZ-36/10/RGBW
2
1) Programming
Menu
1
Function Sub-functions
Reverse
Mic Sense
Menu
No Signal
Mode
Reset
Default
Menu
Factory Set
Addr -
Disp -
En/Ch -
DMX 512
Mode
Fast Auto
Mode
Slow Mode
Sound
16/24 16 Channels/
CH 24 Channels
16 channel mode
DMX
Channel
value
1 Pan 0-255
2 Tilt 0-255
3 Zoom 0-255
4 Dimming 0-255
5 Red 0-255
6 Green 0-255
7 Blue 0-255
8 White 0-255
0-9
9 Strobe
10-255
0-9
10-19
20-29
30-39
Color
40-49
10 effect
50-59
display
60-69
70-79
Description
80-89
Pan, Tilt
90-99
001-255
100-109
Modes: fast, slow, sound
110-119
sensitive
120-127
Motor reset
128-147
Default
Color
10 effect 148-167
Factory settings
display
168-187
To change the settings
press the UP / DOWN
188-207
button, press ENTER to
save. 208-227
Press ENTER to change
228-255
the view.
Color
Press ENTER to change
change
11 0-255
the language.
effect
speed
Tryb DMX 512
0-49
Automatic mode - fast X/Y Macro
12 50-180
function
Automatic mode - slow
181-255
Automatic mode - sound
sensitive X axis fine
13 0-255
tuning
16 or 24 channel mode
EN
Function
540°
270°
10-60°
0-100 Linear focusing
Red 0-100%
Green 0-100%
Blue 0-100%
White 0-100%
No function
Strobe: flash speed from
slow to fast (1-25/s)
No function
R
G
B
W
RG
GB
RB
RW
RW
BW
RGB
RGBE
Colour change - effect 1
Colour change - effect 2
Colour change - effect 3
Colour change - effect 4
Colour change - effect 5
Colour change - effect 6
From slow to fast
No function
X/Y Self-running (speed
from fast to slow)
X/Y Voice activation
X-axis tuning, 16-bit
adjustment
11