Keneksi Ellips Guia Del Usuario página 9

When the battery power is low, the device emits a warning tone and displays a
low battery power message. The battery icon
the battery is low, the phone automatically turns off. Charge the battery to turn the
phone on.
Charging with the charger:
1. Connect the charger plug into the phone connector;
2. Plug the charger into an electrical outlet.
 The device can be used while it is charging, but it may take longer to
fully charge the battery.
 While charging, the device may heat up. This is normal and should not
affect the device's lifespan or performance.
 If the device receives an unstable power supply while charging, the
touch screen may not function.
3. After fully charging, disconnect the device from the charger.
Do not remove the battery if:
 the phone is turned on
 the charger is connected to it
 the phone is connected to the PS via a USB cable
Charging with a data cable:
1. Before charging turn off the PC.
2. Connect one end of the data cable (microUSB) the the phone connector.
3. Connect the other end to the USB port on the PC.
changes its color to red. When