parts be used. Using parts that do not conform to the product may seriously compromise its correct
operation.
In order to unplug the appliance, select "0" and disconnect the plug from the power socket.
11.
ASSEMBLING FOR FREESTANDING USE
Before using the appliance, fix its feet (included separately in the box) to the appliance.
The feet must be fixed to the appliance base using the 4 self-threading screws supplied,
making sure they are correctly placed in their corresponding positions on the bottom of
the appliance.
WARNING: The convector heater must always be positioned at a minimum safety
distance of at least 1 m away from any inflammable material.
USE OF THE ENVIRONMENT THERMOSTAT MODE
NOTE: when the appliance is set at work for the first time or after long
periods of inactivity, it could give a slight smell. This smell will disappear a
little while after turning it on.
Position the appliance as described above and connect the plug to the mains
socket.
Turn the thermostat knob fully clockwise until the maximum position then
turn the adjustment knob to the position "II". Once the heating element is
activated, the luminous indicator lights up.
Once the desired temperature has been reached in the room, turn the
thermostat knob anticlockwise, until hearing a click and the luminous
indicators on the switches go out. In this way, the temperature will be
automatically adjusted and kept constant along time by the thermostat, which
will automatically activate the appliance when the ambient temperature falls
below the desired temperature.
Two different heating power levels are available (750W/2000W).
For minimum power, turn the adjustment knob to the position "I".
For maximum power, turn the adjustment knob to the position "II".
TURBO FAN MODE
Turn the adjustment knob to the position "I" or "II", according to the desired power.
MAINTENANCE
1. This appliance requires no maintenance except cleaning of its external surface.
2. Before cleaning the appliance, disconnect it from the mains socket and wait for it to cool down.
3. Dust the intake grill regularly, removing rope yarn, down or any other foreign matter that might limit regular
air circulation.
4. To clean external surfaces, use only a soft moistened cloth. Do not use solvents.
5. Do not throw the box, use it to store the equipment.
6. When you don't use the appliance, store it in its original packaging to protect from dust and store in a dry
and clean place.
INSTRUCTIONS FOR DISPOSAL
Disposal of this product shall be governed by the European Community Directive 2012/19/UE on Waste Electrical and
Electronic Equipment (WEEE). According to this regulation, the consumer has the obligation NOT to
dispose of this product as household waste but through separate channels of collection (WEEE). In the case
of purchasing a similar new product, this product can be disposed free of charge from the distributor. The
disposal is free, no purchase required, for WEEE small size (external dimensions below 25 cm). Comply
with local regulations in the fields of waste disposal. It is always possible to dispose of this product at a
WEEE collection center predisposed by the public administration. The incorrect disposal of this article
could have potential adverse effects on the environment and human health. This symbol indicates the
consumer's duty to dispose of this article as WEEE and NOT as household waste. Improper disposal of the
product by the consumer involves the application of administrative sanctions provided by law.
DT Istr (TCVP2000) _ Rev 2_06/18
INSTRUCTIONS FOR USE
TCVP2000
11/20