Sonel CMM-11 Manual De Uso página 41

 It is unacceptable to operate:
 a damaged meter which is completely or partially out of or-
der,
 a device with damaged insulation of test leads,
 a meter stored for an excessive period of time in disadvan-
tageous conditions (e.g. excessive humidity).
 repairs may be carried out only by an authorised service point.
Never start the measurements if you have wet or damp
hands.
Do not perform measurements in explosive atmosphere (e.g.
in the presence of flammable gases, vapours, dusts, etc.).
Using the meter in such conditions may result in sparking
and cause an explosion.
Function
A AC, A DC
µA/mA AC, µA/mA DC
V DC, V AC, frequency, duty
cycle
Resistance, capacitance,
diode test
WARNING:
WARNING:
CAUTION!
The limit values of the input signal
CMM-11 – USER MANUAL
The maximum
input value
10 A DC/AC RMS
500 mA DC/AC RMS
600 V DC/AC RMS
250 V DC/AC RMS
39