Button Hold; Hold Function; Display Backlight; Auto-Off - Sonel CMM-11 Manual De Uso

6.3

Button HOLD

6.3.1 HOLD function

This function is used to 'freeze' the measurement result on the
display. To do this, shortly press HOLD
tion is enabled, the display shows symbol
To return to the normal operation mode of the device, press
HOLD button again.

6.3.2 Display backlight

Pressing and holding HOLD
ON/OFF the display backlight function.
6.4

Auto-Off

The meter automatically shuts off after 15 minutes of user inac-
tivity. Symbol
tivated function.
Auto-off function may be temporarily disabled. For this purpose:
 set the rotary switch at OFF position,
 press and hold MODE button,
 set the rotary switch at the desired measuring function,
 wait until the meter reaches the measurement readiness,
 release MODE button.
Each pass of the rotary switch through "OFF" position with
non-pressed MODE button, will activate again the Auto-Off
function.
in the upper left corner of the display indicates ac-
Note:
CMM-11 – USER MANUAL
button. When the func-
H .
button for 2 seconds will turn
53