HELPFUL MESSAGES
If an incorrect operation is made, a helpful message will be displayed. When
a helpful message is displayed, fix the problem following the instructions
below.
Bobbin winder is moved to right (operating position) during sewing.
Check bobbin winder and move it to left.
Buttonhole lever is not lowered or raised.
Lower buttonhole lever when sewing buttonholes.
Raise buttonhole lever when sewing stitch patterns.
Foot control plug is pulled out, while operating foot control.
Push in foot control plug.
interrupted forcibly.
Turn off power switch and eliminate the problem that caused the machine
to stop.
Reverse/tacking stitch button is pushed, while buttonhole stitch is selected.
Tacking stitch is made automatically after buttonhole stitch is completed.
It is not necessary to push the reverse/tacking stitch button.
Bobbin winder is in operation.
32