Tripp-Lite SmartOnline SU16KRT El Manual Del Propietario página 5

Mounting
6
With the included screws, attach the 4 placement guide
brackets to the power modules (2 per power module).
7
Install wiring bustle using the included screws.
8
Remove the terminal covers by unscrewing the 2 screws and
expose the PDU contacts. Save for future use.
9
Connect Battery Module 2 to Power Module 2 before installing
PDU.
10
Using the 4 placement pegs as a guide, slide the PDU into the
placement guide brackets on the power modules. When lined
up properly, the guidance pegs on the rear of the PDU should
fit into the clearance holes on the power modules and a tight
connection will be made.
11
Connect Battery Module 1 to Power Module 1. Attach the PDU
to the power modules by tightening the 4 screws.
6
7
8
9
10
11
5