Laser Classification; Safety Instructions - ADA INSTRUMENTS CUBE MINI GREEN Manual Del Usuario

6
English
• Dirty laser emitting window;
• After line laser has been dropped or hit. Please check the accuracy;
• Large fluctuation of temperature: if instrument will beused in cold areas
after it has been stored in warm areas (or the other way round) please wait
some minutes before carrying out measurements.
ELECTROMAGNETIC ACCEPTABILITY (EMC)
• It cannot be completely excluded that this instrument will disturb other
instruments (e.g. navigation systems);
• will be disturbed by other instruments (e.g. intensive electromagnetic ra-
diation nearby industrial facilities or radio transmitters).
5
LASER CLASS 2 WARNING LABEL ON THE LINE LASER

LASER CLASSIFICATION

The instrument is a laser class 2 laser product accortding to DIN IEC 60825-
1:2014 and Class II in accordance with CFR 21 § 1040 (FDA). This tool may
be used without need for further protective measures.

SAFETY INSTRUCTIONS

• Please follow up instructions given in operators' manual.
• Do not stare into beam. Laser beam can lead to eye injury (even from
greater distances).
• Do not aim laser beam at persons or animals. The laser plane should
be set up above eye level of persons. Use the instrument for measuring
jobs only.
• Do not open instrument housing. Repairs should be carried out by au-
thorized workshops only. Please contact your local dealer.
• Do not remove warning labels or safety instructions.
• Keep instrument away from children.
• Do not use instrument in explosive environment.