Fore/Aft Isolator - Grammer MAXIMO XT DYNAMIC PLUS Manual De Instrucciones

Seat functions and operation
1
2
28

Fore/aft isolator

Under certain driving conditions (for example
with a trailer attached), it is useful to activate
the fore/aft isolator. This means that shock
impacts in the driving direction can be better
absorbed by the driver's seat.
Position 0 = fore/aft isolator OFF
Position 1 = fore/aft isolator ON
After the adjustment of position 1, the
locking lever must latch into the desired
position.
For that, the seat must be pressed backwards
until it latches with an audible click.
After locking, it should not be possible to
move the fore/aft isolator into another
position.
Preparation for connection to
control console/panel
A bracket has been provided on the right-
hand side of the seat to allow connection to
an existing vehicle-specific control
console/panel.
When connecting to an existing vehicle-
specific control console/panel, the installation
instructions supplied by the vehicle
manufacturer must be followed.
Upgrading and retrofitting of GRAMMER
AG driver's seats may only be carried out by
authorized service centers, qualified
personnel or persons who have undergone
appropriate training.
GB