Before you call for service or assistance ...
Check the things you can do yourself. Refer to the installation instructions and your user guide
and check that:
Your product is correctly installed.
1
You are familiar with its normal operation.
2
If the circuit breaker tripped or the fuse blown.
3
If there is a power outage in the area.
4
If after checking these points you still need assistance, please contact your local DCS authorized
service agency or DCS Customer Care Representative for warranty service. Our number is (888)
281-5698. Please have the following information ready before you call:
•
Model Number (can be found below the control panel on the left-hand side of the oven frame,
refer to Installation instructions)
•
Serial Number (can be found below the control panel on the left-hand side of the oven frame,
refer to Installation instructions)
•
Date of installation
•
A brief description of the problem
Your satisfaction is of the utmost importance to us. If a problem cannot be resolved to your
satisfaction, please email us at support@dcsappliances.com or write:
Fisher & Paykel Appliances, Inc.
Attention: DCS Customer Care
5900 Skylab Road
Huntington Beach, CA 92647
www.dcsappliances.com
Service
39
US CA