Use Of The Machine; Maintenance Of The Machine - Polieri TECH 140 Manual De Instalación, Uso Y Mantenimiento

The machine can be activated following these phases:
appropriate pedal, while with TECH cement mixers with reducer tipping do not mount the pedal lock tipping
since the overturning is locked directly on the point of irreversibility of the reduction gear. The rotation
operation is performed through the handwheel which is located at the opposite end of the motor. Once
at the location, the release of the pedal allows the blocking of the glass the desired inclination, while the
blockage of concrete mixers with gear tilting, you have just to leave the knob on the flywheel.
petrol motors open the cab door of the controls and start the engine, after opening the choke, abruptly pulling
the cord to be wrapped around the pulley start in the direction indicated by the arrow stamped on the pulley.
after the aggregates, binders and water depending on the desired dough.
duration of the operations including the loading and unloading can be evaluated at around five minutes.
the steering wheel lock while keeping a firm grip in order to avoid sudden tilting of the mixing glass. After
reaching the unloading position, for cement mixer without reducer tipping, block the glass through the
special pedal. if during the operation of unloading the weight of the tank overcomes the force of resistance
of the operator, to avoid the sudden reversal immediately release the pedal, and the locking devices enters in
operation; when the unloading operation finishes, stop the mixer using the function key with the indication
off or with the stop lever for internal combustion engines and diesel and put the glass in vertical position.
The cement mixer, like all the other machines in movement, has to be moved with caution, completely avoiding
a careless and irresponsible work. Following the next few rules, all the operations can be made in safety:
retaining ring to ensure the power plug.
mixer.
During these operations do not smoke or use fire
enabled pressing the button ON.
motionless.
WARNING
For the good operation of the machine, it is recommended to strictly follow what follows and what is written in
the book of instructions and maintenance of the producers of the engines, diesel or combustion.
feed the machine.
EN

USE OF THE MACHINE

INSTRUCTIONS FOR SAFETY

MAINTENANCE OF THE MACHINE

11