Important Safety Instructions - FHI Heat MINI TURBO Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children are present, basic safety precautions should always be taken,
including the following:
READ ALL INSTRUCTIONS BEFORE USING!
KEEP AWAY FROM WATER
DANGER:
As with most electrical appliances, electrical parts are electrically live even when the switch is in the "OFF" position.
TO REDUCE THE RISK OF SERIOUS INJURY BY ELECTRIC SHOCK:
- ALWAYS UNPLUG THE APPLIANCE IMMEDIATELY AFTER USING.
- NEVER USE WHILE BATHING.
- DO NOT PLACE OR STORE THE APPLIANCE NEAR WATER WHERE IT CAN FALL OR BE PULLED INTO A BATH OR SINK.
- DO NOT PLACE OR DROP THE APPLIANCE INTO WATER OR ANY OTHER LIQUID.
- IF THE APPLIANCE FALLS INTO WATER, UNPLUG IT IMMEDIATELY. DO NOT REACH INTO THE WATER.
4
TO REDUCE THE RISK OF BURNS, ELECTROCUTION, FIRE OR INJURY:
1.
THE APPLIANCE SHOULD NEVER BE LEFT UNATTENDED WHEN PLUGGED IN.
2.
CLOSE SUPERVISION IS NECESSARY WHEN THE APPLIANCE IS USED BY, ON OR NEAR CHILDREN OR THOSE
WHO HAVE DIFFICULTY OPERATING ELECTRICAL APPLIANCES.
3.
USE THE APPLIANCE FOR ITS INTENDED PURPOSE ONLY AS DESCRIBED IN THIS MANUAL. DO NOT USE AT-
TACHMENTS THAT ARE NOT RECOMMENDED BY THE MANUFACTURER.
4.
KEEP THE CORD AWAY FROM HEATED SURFACES. DO NOT WRAP THE CORD AROUND THE APPLIANCE.
5.
THIS DEVICE IS DESIGNED TO MAKE THE UNIT INOPERABLE UNDER SOME ABNORMAL CONDITIONS, SUCH
AS ACCIDENTAL IMMERSION IN WATER. THE ALCI SAFETY DEVICE IS EQUIPPED WITH A TEST BUTTON SO
THAT ITS OPERATION CAN BE CHECKED. NEVER BLOCK THE AIR OPENINGS OF THE APPLIANCE OR PLACE
THE APPLIANCE ON A SOFT SURFACE (e.g., BED OR SOFA) WHERE THE AIR OPENINGS MAY BECOME
BLOCKED. KEEP THE AIR OPENINGS FREE OF LINT, HAIR, DUST AND DIRT.
6.
NEVER DROP OR INSERT ANY OBJECT INTO ANY APPLIANCE OPENING.
7.
DO NOT USE OUTDOORS.
8.
AEROSOL PRODUCTS AND OXYGEN SHOULD NOT BE DIRECTED AT THE APPLIANCE.
9.
DO NOT DIRECT HOT AIR TOWARDS EYES OR OTHER HEAT SENSITIVE AREAS.
10.
MANUFACTURER-APPROVED ATTACHMENTS MAY BE HOT DURING USE. ALLOW THEM TO COOL BEFORE HANDLING.
11.
DO NOT PLACE THE APPLIANCE ON ANY SURFACE WHILE IT IS IN OPERATION.
12.
WHILE USING THE APPLIANCE, KEEP HAIR AWAY FROM THE AIR INLETS.
WARNING
5

Publicidad

Tabla de contenido
loading

Tabla de contenido