Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation instructions
8
unpacking
To ensure the best performance from your new AquaSmart™
clothes washer please follow the instructions below.
Removing the packaging
Remove the outer packaging.
1
Tilt the washer backwards and walk it off the bottom
2
packer one foot at a time.
Remove the bottom packer from under the washer by
3
pulling it out the front.
Caution!
Operating the washer when the bottom packer is in
place can result in damage to the washer.
Lift the lid and remove the basket packer from the basket.
4
Remove the hoses and accessories.
5
Keep the bottom packer and basket packer in case they are required for future transit.
6
Please ensure that the bottom packer has been removed before operating your washer.
Installation
In your clothes washer you will find:
4 rubber inserts for the levelling feet (joined together).
1 hose guide.
2 inlet hoses.
Fig.1 Tilt washer backwards
to remove packer
Publicidad
Capítulos
Tabla de contenido
