Fisher & Paykel WL37T26D Instructivo De Instalación Y Guía De Usuario página 27

Delay Start
The Delay Start option allows you to delay the start of the wash cycle for 1, 3
or 9 hours. This can be useful to time your washing to finish when you arrive
home from work, or to start once you have finished in the shower.
Simply press the DELAY START button to scroll through the time options.
When no lights are shown, Delay Start is off. Once DELAY START has been
selected the START/PAUSE button will cease flashing and the Delay Start
count down timer will start automatically.
Note: We suggest that you avoid using Delay Start for damp, non-colorfast
items as this may cause dye to run.
Soak
The Soak option adds a 2 hour soak into the middle of the wash phase of the
cycle. During the soak, the washer will agitate for a few seconds every minute.
At the completion of the soak period the AquaSmart™ will then complete the
rest of the wash cycle. To select Soak, press the SOAK button once to select
Soak ON.
Note: Once the Soak is under way you can exit out at any time by pressing
the SOAK button. This does not apply to BULKY cycle. For BULKY cycle to exit
SOAK press ADVANCE.
Wash Advance
There may be times when you wish to use the rinse and spin or spin only
portions of the wash cycle. The Advance option allows you to fast forward
your cycle to the desired location. Press the ADVANCE button repeatedly to
advance the cycle to the desired position, then press START.
Note: If you wish to change any of the wash options while your AquaSmart™ is running please
press START/PAUSE then change the required option.
Wash options
25
EN