4.6
Maintenance
4.6.1
Danger
Any maintenance with the machine in working situation is dangerous. TURN IT OFF
BY PULLING THE PLUG OFF THE SOCKET DURING MAINTENANCE.
IMPORTANT
Always unplug the machine when emergency cases arise.
4.7 Advice
Electrical or mechanical maintenance must be done by qualified personal for such
operation.
Person in charge has to be sure that the machine is under TOTAL SAFETY conditions
when working.
5
Analysis and Problems Solving
5.1 Problems, causes and solutions
The Dough Dividers DMS were designed to operate with minimum maintenance, but
the natural wearing caused by long time use of the equipment may eventually cause some
malfunctions.
If you have any problems with your Dough Divider, check the Table 02 next, on which the most
common situations are listed with recommended solutions.
* Service life – 2 years for regular work shift
Table - 02
Problems
Causes
* The machine does not
* The quantity of douh is
the dough.
not correct..
*
Divider plate not
adjusted.
6. GENERAL ADVICES
- Do not wear loose fitting clothes while operating the unit. Do not use bracelets or any other piece of jewelry. Have
your hair always shortened and held up (use hair fishnets if necessary) in a way it cannot reach any part of the machine.
Roll up any loose sleeves.
- SKYMSEN is not responsible for any harm or injury caused by the negligent or inappropriate use of this equipment by
any operator. This equipment must be operated only by persons whose age equals or exceeds 18 years old, in a safe and
sound state of mind, free from the influence of any kind of drugs and alcohol, that received proper training and
instructions regarding the correct operation of this machine, that are wearing correct and authorized safety clothes. All
and any kind of modifications carried on and applied to this machine immediately nullifies any kind of warranty and
may result in harm and injuries to the individuals operating this machine and to individuals that are located in the
machine surrounding areas while it is being operated.
- Under no circunstances place your hands in the moving parts of the machine while it is being used. Make sure the
machine has come to a complete stop before acessing the processed ingredients.
Solutions
* Check the quantity of dough.
* Call technical assistance..
08