Tools Required - Whittier Wood Products 172Wa Manual Del Usuario

172Wa, 179Wa 194Wa & 207Wa Stools
ASSEMBLY INSTRUCTIONS
Phillips Head Screwdriver, Wood Glue, Rubber Mallet or Padded Hammer.
FIG. 1
1) Lay out the wood parts in their approximate locations to aid in the identification and assembly.
F
x2
FIG. 2
2) Insert Barrel Nut (F) into Seat (A). Align hole in barrel bolt with hole in seat. See FIGURE 2.

TOOLS REQUIRED:

E
C
C
C
B
A
NOTE: A new swivel may appear
frozen or hard to turn. It can be
M
loosened by twisting it a little
before assembly. Be sure to use a
D
towel or gloves to protect hands as
the edges of the swivel may be
sharp.
C
F
IMPORTANT:
READ GLUING HINTS
BEFORE ASSEMBLING!
Not intended for use by
children without adult
supervision.
172W shown in all
drawings.
F
A
172Wa, 179Wa, 194Wa, & 207Wa (Rev. 2/07) — Page 3