FALKON W2202S Manual De Usuario página 9

OPERATION OF DISPLAY
The control buttons are shown as the figure.
Models of the same product series are only
different in button position and panel pattern,
please refer to the practical model.
3.1 Power indicator light
When the display is working normally, the indicator light is off; when there is no signal, the indicator light
blinks in blue; when the signals are sent again in the no signal state, the machine will return to normal work;
when the machine is in the shutdown state, the blue indicator light is on.
3.2 lnstruction of button functions
M
Leftwards
Rightwards
A
Power source
Tras presionar el botón M
M
Leftwards
Rightwards
A
FUENTE DE ENERGIA
3.3 Safety protection
When the video signals of PC exceeds the frequency range of the display, the horizontal and field synchronizing
signals will be shut down to protect the display. Then, you have to set the PC output frequency to an acceptable
range so as to make the display work normally.
Menu button
Brightness adjusting shortcut
Volume adjusting shortcut
Auto adjusting
On / Off
OK
Leftwards select in same level menu, progress bar -
Rightwards select in same level menu, progress bar +
Return to previous menu
On/Off
P 9
FALKON
Monitor Display